Description
QTY / PART | DESCRIPTION |
(1) 1976 | Hammer for .498-in. shank tools |
(1) 3700S-3 | Retainer |
(1) 8250H | Regulator |
(2) 8260 | Ergo Chisel Grip (non-turn) |
(1) 3190-12-PL | 12-in. Moil Point (non-turn) |
(2) 3189-PL | Double Blade Panel Cutter (non-turn) |
(2) 3180-PL | Kwik Cutter (non-turn) |
(2) 3180-18-PL | 18-in. Kwik Cutter (non-turn) |
(2) 3089-PL | Double Blade Panel Cutter (turn-type) |
(2) 3080-PL | Kwik Cutter (turn-type) |
(2) 3080-18-PL | 18-in.Kwik Cutter (turn-type) |
(1) 1030 | 15-ft., 3/8-in. Hose |
(1) 1045 | 3/8-in. Male Connector (1/4-in. NPT hammer) |
(1) 1048 | 3/8-in. Male Connector (1/4-in. NPT regulator) |
(1) 1052 | 3/8-in. Female Coupler (3/8-in. NPT hose) |
(1) 5317 | 20-in. Steel Kit Box |
(1) 8259 | Kit Box Liner |
(1) 1074 | 4-oz. Oil |
(1) 674-RT | Trim Removal Tool |
The Ajax Rescue Tools high-pressure regulator has a universal design which allows the technician to use either 2216 psi or 4500 psi air tanks without having to change the regulator. This regulator is rated at an operating pressure up to 300 psi, which is well above the recommended operating pressure of most air tools. Normal body metals, such as, A, B and C posts, quarter panels and firewalls require only 90 psi.
However, heavier metals, such as Nader pins, door hinges, etc., may require 150-160 psi. A safety blow-off valve prevents the technician from exceeding the maximum pressure capacity level. This regulator lets you operate the tool at the proper air pressure essential for the most efficient operation while allowing you to use extra air power when needed. This allows the rescue technician to adjust to a higher operating pressure when attempting to cut through heavier steel, and complete a successful rescue or extrication..
Reviews
There are no reviews yet.